close
McCain

Customer Login

Access to online tutorials, webinars, FAQ's, documentation library, and more!  To gain access, contact McCain Customer Service.

All Access Login
Traffic Equipment & Hardware
170 ATC HC11 Controller

170 ATC HC11 Controller

Product Brochure:
170_Controllers.pdf

Product Overview

McCain’s 170 Controllers are industry standard controllers in full compliance with Caltrans Transportation Electrical Equipment Specification (TEES) standards. The 170 controllers are primarily designed to operate eight-phase dual ring intersections. Built to McCain’s high quality standards, the controllers’ rugged and dependable construction is reliable and capable of operating in harsh environments. The controllers’ 19-inch Electronics Industry Alliance (EIA) rack mount form allows them to easily fit any standard EIA-based cabinet. Built on a modular design, McCain’s 170 line of controllers accommodate the easy interchange of modules and components.

Benefits

  • Multi-purpose microcomputer
  • Operates in harsh environments
  • Vertical board design
  • Accepts two plug-in communications modules
  • Low maintenance
  • Low wattage, removable power supply

Features & Specifications

McCain reserves the right to change product specifications without notice. For the most up-to-date information, please contact McCain.

Standard Features

  • CPU Module: The CPU module includes the MPU; a clock generator capable of doubling the basic frequency; ACIAs with RS232 interface and five clock speeds; 32K of battery backed, write protected RAM; decode logic; and dual bus drivers.
  • Input Module: The single input module uses CMOS technology to increase noise immunity in hostile environments. A total of 44 inputs are directed to the C1 connector. Includes Down Time Accumulator (DTA), power-up/power-down circuitry, and 2.2 farad standby power capacitor.
  • Output Module: A single output module contains all output circuitry. Output drivers operate switch packs in the cabinet and LED indicators on the front panel. 56 of the outputs are directed to the C1 connector and 16 are used to operate the front panel. Lightning protection devices are used to eliminate high energy voltage and current spikes.
  • Power Supply: The power supply module is an efficient and easily removable AC/DC linear power supply. A long holdup after power-down feature, assures that all supplies are held within specifications following a power failure (70 milliseconds for the 170E/170E HC11 and 550 milliseconds for the 170 ATC HC11). The power supply is self-contained and input power is supplied through an 18-pin power connector to the mother board.
  • Chassis:Components are manufactured on computer numerical control (CNC) equipment for best form and fit. Module interconnect is provided by a mother board with separate busses for I/O and memory. Modules are vertically oriented with mechanically keyed PC edge connectors.

General Specifications
 
Dimensions 19 “ W x 7” H x 13” D (rounded to the nearest inch)
Timing Accuracy Crystal control and AC line tracking via software PLL
Communications RS232 compatible ACIA ports (4) with up to 2 modem slots
Real-Time Clock Integrated into non-volatile RAM
Input Power 120 VAC, 60 Hz (typical), 40 watts
Power Supply + 5 V Logic ± 0.1 V 2.4 A
+ 5 V External ± 0.25 V 300 mA
+ 5 V Front Panel ± 0.25 V 500 mA
- 5 V Spare ± 0.25 V 300 mA
+ 12 V Modem ±0.6 V 1.0 A
- 12 V Modem ± 0.6 V 300 mA
+ 12 V Input Board 60 mA
Environmental Operating temperature: -37° C to +74° C; Humidity: 0 to 95% (non-condensing)
Weight 15 lbs with Memory Module

Options

  • McCain traffic control software
  • GPS (Global Positioning System) module
  • Modem module

Add this page to your favorite social bookmark service.